Kilsaran KPRO Street T60 is a rapid-setting, high-strength bedding mortar designed for the bedding of ironworks as part of the Department of Transport Part 4 HD 27/94. This is required because mortars for bedding ironwork, such as manhole cover frames, during repairs, should reach 20N/mm² within 2 hours. Additionally, Kilsaran T60 is suitable for use in the following applications:
- Bedding and raising street ironwork
- Manhole frames and gullies
- Bedding posts, railings, and bollards
- Bedding of precast units
- Emergency bedding of stone setts, slabs, and cobbles
It is suitable for use in temperatures between +5°C and +30°C. Before application, ensure the area is free from any dust, dirt, or grease, and make sure it is presoaked and has all ponded water removed. To use Kilsaran T60, it should be mixed in a forced-action mixer or by hand with 2.5-2.7 litres of clean potable water until a stiff, zero-slump, and homogeneous mix is achieved. Only mix enough material that can be placed and finished within 5-10 minutes. Once mixed, place the fresh material in the prepared area in depths from 10mm to 75mm. For applications of greater depths, the material can be bulked out with well-graded 10mm aggregate. When bedding frames, ensure to position and level as soon as possible after placing. Exposed areas should be given a floated finish. Once the initial set of the material has taken place, the area can be backfilled.
Benefits:
This product offers many advantages over conventional site-mixed or ready-mixed rendering mortars, such as:
- Rapid Setting – Initial set in 15 minutes
- Shrinkage compensated
- Light foot traffic in just 1 hour
- High early and ultimate strength
- Long term durability
- Convenient and user-friendly
- Eliminates wastage
- Minimum traffic disruption
Technical Data:
Kilsaran T60 is produced in a ISO 9001 quality-controlled environment.
