Cromar Bitumen Paint 5L ABP/501
Can be applied by brush or spray
Can be applied to damp (not wet) surfaces
One coat application
Cromar Bitumen Primer For Torch On Roofing Felt 1 litre / 5 litre / 25 litre
A low viscosity, high penetration, cold applied bituminous solution designed to prime and seal porous roof surfaces prior to the application of bituminous materials.
Cromar Bitumen Primer seals porous substrates and promotes the adhesion of bituminous waterproofing systems and sheet coverings.
Features:
For use on metal, concrete, asbestos cement, slate, lightweight concrete screeds, roofing felt & asphalt
Can be applied by brush or spray
Can be applied to damp (not wet) surfaces
One coat application
Cromar Bitumen Primer shoud be applied evenly in one coating
Resistant to water within 20 - 30 minutes
Coverage:
Metal Surfaces: 6 - 12 m/2 per litre
Concrete Surfaces: 6 - 8 m/2 per litre
Lightweight concrete screeds and asbestos cement: 3.5 - 5 m/2 per litre
Metal Surfaces: 1 x 1kg tin covers 6 - 8 m/2
Metal Surfaces: 1 x 5 litre tin covers 30 - 40 m/2
Metal Surfaces: 1 x 25 litre tin covers 150 - 200 m/2
Drying:
It is essential after priming concrete or screeded surfaces that the coating is free of solvent therefore a drying time of 2 hours should be allowed
